ISO 23277-2006 焊缝的无损检验.焊缝的穿透试验.验收等级

sigh007

                   【英文标准名称】:     Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels            【原文标准名称】:     焊缝的无损检验.焊缝的穿透试验.验收等级            【标准号】:     ISO 23277-2006            【标准状态】:     现行            【国别】:     国际            【发布日期】:     2006-10    【实施或试行日期】: 【发布单位】: 国际标准化组织(IX-ISO)【起草单位】: ISO/TC 44【标准类型】: ()【标准水平】: ()【中文主题词】: 定义;精整;不规则性;材料;材料试验;金属的;金属;无损检验;渗透探伤;容许性;规范(验收);表面不连续性;表面光洁度;表面处理;试验类别;试验;试验条件;焊接接头;焊接;焊接工程;焊缝【英文主题词】: Definitions;Finishes;Irregularities;Materials;Materials testing;Metallic;Metals;Non-destructive testingenetrant flaw detectionermissibility;Specification (approval);Surface discontinuities;Surface finishes;Surface treatment;Test categories;Testing;Testing conditions;Welded joints;Welding;Welding engineering;Welds【摘要】: This International Standard specifies acceptance levels for indications from surface breaking imperfections inmetallic welds detected by penetrant testing.The acceptance levels are primarily intended for use during manufacture examination, but where appropriatethey can be used for in-service inspection.The acceptance levels in this International Standard are based on detection capabilities that can be expectedwhen using techniques specified in ISO 3452 and parameters recommended in Annex A. The acceptancelevels can be related to welding standards, application standards, specifications or codes. Such a relationshipis shown in ISO 17635 for ISO 5817 and ISO 10042.【中国标准分类号】: J33【国际标准分类号】: 25_160_40【页数】: 4P;A4【正文语种】: 英语         
         

heg316

楼主楼主分享~~~

heg316

楼主~~好像没有找到该标准的连接？不是我眼拙了吧？

yuanhang

这是ISO的RT的标准吧？