ASTM D5430-2007 织物目视检验和分级的标准试验方法

sigh007

                   【英文标准名称】:     Standard Test Methods for  Visually Inspecting and Grading Fabrics            【原文标准名称】:     织物目视检验和分级的标准试验方法            【标准号】:     ASTM D5430-2007            【标准状态】:     现行            【国别】:                 【发布日期】:     2007    【实施或试行日期】: 【发布单位】: 美国材料与试验协会(US-ASTM)【起草单位】: D13.59【标准类型】: (Test Method)【标准水平】: ()【中文主题词】: 缺陷;织物;分级;试验;纺织材料【英文主题词】: Defects--textiles; Grading--textiles; Numerical designation (for fabric grading); Textile fabrics (general); Visual examination--textiles【摘要】: Test Method D 5430 is considered satisfactory for acceptance testing a commercial shipments since the method has been used extensively in the trade for grading of fabric and fabric acceptance determination. The penalty points obtained in grading the same rolls or bolts of fabric may vary considerably when using each of the three options listed herein. For this reason, the same point assignment option should be used in cases of disagreement arising from differences of values reported by the purchaser and the supplier. If there are differences of practical significance between reported test results for two laboratories (or more), comparative test should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, ensure the test samples to be used are as homogeneous as possible, are drawn from the material from which the disparate test results ere obtained, and are randomly assigned in equal numbers to each laboratory for testing. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results for that material must be adjusted in consideration of the known bias.1.1 These test methods describe a procedure to establish a numerical designation for grading of fabrics from a visual inspection. 1.2 These test methods may be used for the delivery and acceptance of fabrics with requirements mutually agreed upon by the purchaser and the supplier. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 【中国标准分类号】: W04【国际标准分类号】: 59_080_30【页数】: 3P.;A4【正文语种】:           
         

2013

最新版:

ASTM D5430-13 织物目视检验分级的标准试验方法
http://bbs.infoeach.com/thread-18045-1-1.html