IEC 60695 Fire hazard testing 火灾风险测试

shukesan

IEC 60695-1-1-1999	Part 1-1: Guidance for assessing the fire  hazard of electrotechnical products – General guidelines
IEC 60695-1-10-2009	Part 1-10: Guidance for assessing the fire hazard of electrotechnical  products – General guidelines
IEC 60695-1-11-2014	Part 1-11: Guidance for assessing the fire hazard of electrotechnical  products – Fire hazard assessment
IEC 60695-1-12-2015	Part 1-12: Guidance for assessing the fire hazard of electrotechnical  products – Fire safety engineering
IEC TS 60695-1-20-2008	Part 1-20: Guidance for assessing the fire hazard of electrotechnical  products – Ignitability – General guidance
IEC 60695-1-20-2016	Part 1 -20: Guidance for assessing the fire hazard of electrotechnical  products – Ignitability – General guidance
IEC TR 60695-1-21-2008	Part 1-21: Guidance for assessing the fire hazard of electrotechnical  products – Ignitability – Summary and relevance of test methods
IEC 60695-1-30-2008	Part 1-30: Guidance for assessing the fire hazard of electrotechnical  products – Preselection testing process – General guidelines
IEC TS 60695-1-40-2002	Part 1-40: Guidance for assessing the fire hazard of electrotechnical  products Insulating liquids
IEC 60695-2-4-1-1991 + amd1-1994 scan	Amendment 1 Part 2: Test methods - Section 4/sheet 1: 1 kW nominal  pre-mixed test flame and guidance
IEC 60695-2-10-2000	Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and  common test procedure
IEC 60695-2-11-2014	Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability  test method for end-products (GWEPT)
IEC 60695-2-12-2014	Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability  index (GWFI) test method for materials - Edition 2.1 Consolidated Reprint
IEC 60695-2-13-2014	Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition  temperature (GWIT) test method for materials - Edition 2.1 Consolidated  Reprint
IEC 60695-4-2012	Part 4: Terminology concerning fire tests for electrotechnical products
IEC 60695-5-1-2002	Part 5-1: Corrosion damage effects of fire effluent General guidance
IEC TS 60695-5-2-2002	Part 5-2: Corrosion Damage Effects of Fire Effluent Summary and Relevance  of Test Methods
IEC TS 60695-5-3-2003	Part 5-3: Corrosion damage effects of fire effluent – Leakage-current and  metal-loss test method
IEC 60695-6-1-2010	Part 6-1: Smoke obscuration – General guidance - Edition 2.1 Consolidated  Reprint
IEC 60695-6-2-2011	Part 6-2: Smoke obscuration – Summary and relevance of test methods
IEC 60695-6-30-1996	Part 6: Guidance and test methods on the assessment of obscuration hazard  of vision caused by smoke opacity from electrotechnical products involved in  fires - Section 30: Small scale static method - Determination of smoke  opacity - Description of the apparatus
IEC TR 60695-6-30-1996	Part 6: Guidance and test methods on the assessment of obscuration hazard  of vision caused by smoke opacity from electrotechnical products involved in  fires – Section 30: Small scale static method – Determination of smoke  opacity – Description of the apparatus
IEC TS 60695-6-31-2013	Part 6-31: Smoke obscuration – Small-scale static test – Materials
IEC 60695-7-1-2010	Part 7-1: Toxicity of fire effluent – General guidance
IEC TR 60695-7-2-2002	Part 7-2: Toxicity of fire effluent – Summary and relevance of test  methods Numéro
IEC 60695-7-3-2011	Part 7-3: Toxicity of fire effluent – Use and interpretation of test  results
IEC TS 60695-7-50-2002	Part 7-50: Toxicity of fire effluent Estimation of toxic potency  Apparatus and test method
IEC TS 60695-7-51-2002	Part 7-51: Toxicity of Fire Effluent - Estimation of Toxic Potency:  Calculation and Interpretation of Test Results
IEC 60695-8-1-2008	Part 8-1: Heat release – General guidance
IEC TR 60695-8-2-2008	Part 8-2: Heat release – Summary and relevance of test methods
IEC TS 60695-8-3-2008	Part 8-3: Heat release – Heat release of insulating liquids used in  electrotechnical products
IEC 60695-9-1-2013	Part 9-1: Surface spread of flame – General guidance
IEC 60695-9-2-2014	Part 9-2: Surface spread of flame – Summary and relevance of test methods
IEC 60695-10-2-2014	Part 10-2: Abnormal heat – Ball pressure test method
IEC 60695-10-3-2002	Part 10-3: Abnormal Heat - Mould Stress Relief Distortion Test
IEC 60695-11-2-2013	Part 11-2: Test flames – 1 kW nominal pre-mixed flame – Apparatus,  confirmatory test arrangement and guidance CORRIGENDUM 1
IEC 60695-11-2-2017	Part 1 1 -2: Test flames – 1 kW nominal pre-mixed flame – Apparatus,  confirmatory test arrangement and guidance
IEC 60695-11-3-2012	Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test  methods
IEC 60695-11-4-2011	Part 11-4: Test flames – 50 W flame – Apparatus and confirmational test  method
IEC 60695-11-5-2004	Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory  test arrangement and guidance
IEC 60695-11-10-2013	Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
IEC 60695-11-10-2013 cor1-2014	Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
IEC TS 60695-11-11-2008	Part 11-11:Test flames – Determination of the characteristic heat flux  for ignition from a non-contacting flame source
IEC TS 60695-11-11-2016	Part 11-11:Test flames – Determination of the characteristic heat flux  for ignition from a non-contacting flame source
IEC 60695-11-20-2003	Part 11-20: Test flames - 500 W flame test method
IEC 60695-11-20-2015	Part 1 1 -20: Test flames – 500 W flame test method
IEC 60695-11-20-2015 cor1-2016	Part 11-20: Test flames - 500 W flame test method
IEC TS 60695-11-21-2005	Part 11-21: Test flames 500 W vertical flame test method for tubular  polymeric materials
IEC TR 60695-11-30-2001	Part 11-30: Test Flames - History and Development from 1979 to 1999
IEC TS 60695-11-40-2002	Part 11-40: Test Flames - Confirmatory Tests - Guidance

admin

谢谢您的分享,金币已奖励!

hgundas

謝謝樓主的分享！！！！！！