ASTM E2009-2008 用差示扫描量热法测定烃类氧化起始温度 下载

sigh007

中文名称: 用差示扫描量热法测定烃类氧化起始温度的试验方法

英文名称:Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

            
            
                          

中标分类：G17	ICS分类：17.200.10
标准分类编号：AS	页数：5

            
            
                          

发布日期：	实施日期：2008-09-01	作废日期：
被替代标准：		代替标准：ASTM E2009-2002
引用标准：ASTM D1193;ASTM D3350;ASTM D3895;ASTM D4565;ASTM D5483;ASTM E180;ASTM E1858;ASTM E203;Reagent Chemicals,;ASTM E50;ASTM E473;ASTM E691;ASTM E694;ASTM E967		采用标准：
起草单位：		归口单位：

            
            
                          

标引依据：

补充修订：

备注：

范围：1.1 This test method describes the determination of the oxidative properties of hydrocarbons by differential scanning calorimetry or pressure differential scanning calorimetry under linear heating rate conditions and is applicable to hydrocarbons, which oxidize exothermically in their analyzed form. 1.2 Test Method A—A differential scanning calorimeter (DSC) is used at ambient pressure, of one atmosphere of oxygen. 1.3 Test Method B—A pressure DSC (PDSC) is used at high pressure, for example, 3.5 MPa (500 psig) oxygen. 1.4 Test Method C—A differential scanning calorimeter (DSC) is used at ambient pressure of one atmosphere of air. 1.5  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices a 下载：

nbjwbzj

谢谢分享！！！！！！！

果冻_liudan

谢谢分享！！！！！！

洞爷湖

正好需要！太感谢啦！