ASTM D5482-2007 石油产品蒸气压力的标准试验方法(大气的小型法)

sigh007

                   【英文标准名称】:     Standard Test Method for Vapor Pressure of Petroleum Products (Mini Methodx2014;Atmospheric)            【原文标准名称】:     石油产品蒸气压力的标准试验方法(大气的小型法)            【标准号】:     ASTM D5482-2007            【标准状态】:     现行            【国别】:                 【发布日期】:     2007    【实施或试行日期】: 【发布单位】: 美国材料与试验协会(US-ASTM)【起草单位】: D02.08.0D【标准类型】: (Test Method)【标准水平】: ()【中文主题词】: 大气的;汽油;烃类;石油;石油产品;试验【英文主题词】: dry vapor pressure equivalent;  gasoline;  hydrocarbon-oxygenate blends;  mini method-atmospheric;  petroleum products;  vapor pressure; Dry vapor pressure; Gasoline; Hydrocarbon-oxygenate blends; Instrumental measurement--petroleum products; Mini method;【摘要】: Vapor pressure is an important physical property of volatile liquids. Vapor pressure is critically important for both automotive and aviation gasolines, affecting starting, warm-up, and tendency  to vapor lock with high operating temperatures or high altitudes. Maximum  vapor pressure limits for gasoline are legally mandated in some areas as a  measure of air pollution control.1.1 This test method covers a procedure for the determination of total vapor pressure of petroleum products using automatic vapor pressure  instruments. The test method is suitable for testing samples with boiling  points above 0x00B0;C (32x00B0;F) that exert a vapor pressure between 7 and  110 kPa (1.0 and 16 psi) at 37.8x00B0;C (100x00B0;F) at a vapor-to-liquid ratio  of 4:1. The test method is applicable to gasolines containing oxygenates.  No account is made of dissolved water in the sample.   Note 18212;Because the external atmospheric pressure does not influence the resultant vapor pressure, this vapor pressure is an absolute pressure at 37.8x00B0;C  (100x00B0;F) in kPa (psi). This vapor pressure differs from the true vapor  pressure of the sample due to some small vaporization of the sample and dissolved  air into the air of the confined space.  1.1.1 Some gasoline-oxygenate blends may show a haze when cooled to 0 to 1x00B0;C. If a haze is observed in 8.5, it shall be indicated in the reporting of results. The precision and bias statements for hazy samples have not been determined (see Note 6). 1.2 This test method is a modification of Test Method D 5191 (Mini Method) in which the test chamber  is at atmospheric pressure prior to sample injection. 1.3 This test method covers the use of automated vapor pressure instruments that perform measurements on liquid sample sizes in the  range from 1 to 10 mL. 1.4 This test method is suitable for the determination of the dry vapor pressure equivalent (DVPE) of gasoline and gasoline-oxygenate  blends by means of a correlation equation (see 13.2). The calculated  DVPE is considered equivalent to the result obtained on the same material  when tested by Test Method D 4953. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility  of the user of this standard to establish appropriate safety and health practices  and determine the applicability of regulatory limitations prior to use. (For specific warning statements, see 7.2 through 7.7.)【中国标准分类号】: E30【国际标准分类号】: 75_08【页数】: 5P.;A4【正文语种】:           
         

nano

这个文件应该怎么下载

mbyy0110

这个没有下载链接的怎么下载啊