ASTM E2307-2010 用中型、多层试验仪测定围护火障系统耐火 下载

sigh007

中文名称: 用中型、多层试验仪测定围护火障系统耐火性的试验方法

英文名称:Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale,Multi-story Test Apparatus

            
            
                          

中标分类：P16	ICS分类：13.220.20
标准分类编号：AS	页数：20

            
            
                          

发布日期：	实施日期：2010-05-01	作废日期：
被替代标准：		代替标准：ASTM E2307-2004e1
引用标准：ASTM E176;ASTM E511;ASTM E631;ASTM E1529;ASTM E1966;The 14th Edition of the Gypsum Associations Fire Resistance Design Manual (GA 600 94);ASTM E84;ASTM E108;ASTM E119		采用标准：
起草单位：		归口单位：

            
            
                          

标引依据：

补充修订：

备注：

范围：1.1 This test method measures the performance of the perimeter fire barrier and its ability to maintain a seal to prevent fire spread during the deflection and deformation of the exterior wall assembly and floor assembly during the fire test, while resisting fire exposure from an interior compartment fire as well as from the flame plume emitted from the window burner below. The end point of the fire-resistance test is the period of time elapsing before the first condition of compliance is reached as the perimeter fire barrier is subjected to a time-temperature fire exposure. 1.2 The fire exposure conditions used are those specified by this test method for the first 30 min of exposure and then conform to the Test Methods E119 time-temperature curve for the remainder of the test in the test room. 1.3 This test method specifies the heating conditions, methods of test, and criteria for evaluation of the ability of a perimeter fire barrier to maintain the fire resistance where a floor and e 下载：

下载地址: