世界资料网论坛

标题: BS EN ISO 5263-3-2004 纸浆.实验室湿解离.大于或等于85℃时机械纸浆的解离 [打印本页]

作者: sigh007 时间: 2012-3-26 22:01:09 标题: BS EN ISO 5263-3-2004 纸浆.实验室湿解离.大于或等于85℃时机械纸浆的解离

【英文标准名称】: Pulps — Laboratorywet disintegrationPart 3: Disintegration of mechanicalpulps at > 85 °C (ISO 5263-3:2004) 【原文标准名称】: 纸浆.实验室湿解离.大于或等于85℃时机械纸浆的解离【标准号】: BS EN ISO 5263-3-2004 【标准状态】: 现行【国别】: 英国【发布日期】: 2009-04-30 【实施或试行日期】: 2009-04-30【发布单位】: 英国标准学会(GB-BSI)【起草单位】: BSI【标准类型】: ()【标准水平】: ()【中文主题词】: 定义;分解;爆裂特性;分解法;纤维;仪器;实验室试验;人造纤维;测量;力学;方法;纸浆;半成品;试样制备;试验设备;试验;湿解离;湿态强度;木浆【英文主题词】: Definitions;Disintegration;Disintegration characteristics;Disintegration method;Fibres;Instruments;Laboratory testing;Man-made fibres;Measurement;Mechanic;Methods

aper pulp

ulp;Semi-finished products;Specimen preparation;Test equipment;Testing;Wet desintegration;Wet strength;Wood pulp【摘要】: This part of ISO 5263 specifies an apparatus and the procedures for the laboratory wet disintegration ofmechanical pulps that exhibit latency. This apparatus and procedure are required for preparation of the testportion in a number of other International Standards dealing with pulps.ISO 5263-3 is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemimechanicalpulps) exhibiting latency. Mechanical pulps not exhibiting latency shall be disintegrated accordingto ISO 5263-2.The procedure specified in ISO 5263-2 should be used to disintegrate all mechanical pulps to be measured forbrightness.NOTE Brightness is not significantly altered by the presence of latency; however, hot disintegration of mechanicalpulps can lead to significant loss of brightness.【中国标准分类号】: Y31【国际标准分类号】: 85_040【页数】: 18P.;A4【正文语种】: 英语

欢迎光临世界资料网论坛 (http://bbs.infoeach.com/)