ASTM D4591-2007 用差式扫描量热法测定含氟聚合物温度和转化热的标准试验方法

sigh007

                   【英文标准名称】:     Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry            【原文标准名称】:     用差式扫描量热法测定含氟聚合物温度和转化热的标准试验方法            【标准号】:     ASTM D4591-2007            【标准状态】:     现行            【国别】:                 【发布日期】:     2007    【实施或试行日期】: 【发布单位】: 美国材料与试验协会(US-ASTM)【起草单位】: D20.15【标准类型】: (Test Method)【标准水平】: ()【中文主题词】: 转化;测定;氟;塑料;聚合物;温度;测试【英文主题词】: differential scanning calorimetry;  DSC;  fluoropolymer(s);  heats of fusion;  melting point;  thermal analysis【摘要】: DSC analysis may be used with fluoropolymers to achieve at least four different objectives as follows: 4.1.1 To measure transition temperatures to aid in the identification of the various fluoropolymers, individually or in mixtures; 4.1.2 To compare the relative levels of crystalline content of two or more specimens of a sample of a fluoropolymer relative to another sample by measuring the heat of fusion;  Note 28212;Absolute values of crystalline content cannot be determined until values for heats of fusion of the completely crystalline polymers are available.  4.1.3 To characterize PTFE (DSC thermal curves determined on powders or products of PTFE that have never been melted convey appreciable information about details of morphology and molecular structure);4  4.1.4 To supplement the test for standard specific gravity (SSG) described in Specifications D 4894 and D 4895 by using the heat of crystallization of pure PTFE homopolymer, depending on the relative molecular weight of the specimen. The scopes of these specifications, however, include PTFE resins modified with small amounts of comonomers, and many commercial PTFE resins are modified in this manner. These modifications can have profound effects on crystallization behavior. Published relationships4  between heat of crystallization and molecular weight refer to pure PTFE homopolymers and, therefore, cannot be applied to the modified resins.1.1 This test method defines conditions for the use of differential scanning calorimetry (DSC) with fluoropolymers. It covers the use of DSC analyses with the fluoropolymers, PTFE, PVDF, PCTFE, and PVF and their copolymers PFA, MFA, FEP, ECTFE, EFEP, VDF/HFP, VDF/TFE/HFP, VDF/CTFE. The test method is applicable to the analysis of powders as well as samples taken from semi-finished or finished products. The nature of fluoropolymers is such that special procedures are needed for running DSC analysis and interpreting the results.1.2 The values stated in SI units as detailed in IEEE/ASTM SI-10  are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. There is currently no ISO standard that duplicates this test method. ISO 12086-1 and ISO 12086-2 cover similar testing and reference this test method for testing conditions.【中国标准分类号】: G32【国际标准分类号】: 83_080_20【页数】: 4P.;A4【正文语种】:           
         

andykidd

木有下载文件啊需要这个标准

Doris924

需要这个的中文版本 参考参考

a1314008888

VV 45914591459145914591459145914591