IEC 61000 Electromagnetic compatibility (EMC) 电磁兼容性

shukesan

IEC TR 61000-1-1-1992 scan	Electromagnetic  compatibility (EMC) Part 1: General Section 1: Application and interpretation  of fundamental definitions and terms
IEC TS 61000-1-2-2008	Electromagnetic compatibility (EMC) – Part 1-2: General –  Methodology for the achievement of functional safety of electrical and  electronic systems including equipment with regard to electromagnetic  phenomena
IEC 61000-1-2-2016	Electromagnetic compatibility (EMC) – Part 1 -2: General –  Methodology for the achievement of functional safety of electrical and  electronic systems including equipment with regard to electromagnetic  phenomena
IEC TR 61000-1-3-2002	Electromagnetic Compatibility (EMC) - Part 1-3: General - The  Effects of High-Altitude EMP (HEMP) on Civil Equipment and Systems
IEC TR 61000-1-4-2005	Electromagnetic compatibility (EMC) Part 1-4: General Historical  rationale for the limitation of power-frequency conducted harmonic current  emissions from equipment, in the frequency range up to 2 kHz
IEC TR 61000-1-5-2004	Electromagnetic compatibility (EMC) Part 1-5: General High power  electromagnetic (HPEM) effects on civil systems
IEC TR 61000-1-6-2012	Electromagnetic compatibility (EMC) – Part 1-6: General – Guide  to the assessment of measurement uncertainty
IEC TR 61000-1-6-2012 cor1-2014	Electromagnetic compatibility (EMC) – Part 1-6: General – Guide  to the assessment of measurement uncertainty
IEC TR 61000-1-7-2016	Electromagnetic compatibility (EMC) – Part 1 -7: General – Power  factor in single-phase systems under non-sinusoidal conditions
IEC TR 61000-2-1-1990 scan	Electromagnetic compatibility (EMC) Part 2: Environment Section  1: Description of the environment - electromagnetic environment for  low-frequency conducted disturbances and signalling in public power supply  systems
IEC TR 61000-2-1-1990	Electromagnetic compatibility (EMC) Part 2: Environment Section  1: Description of the environment - electromagnetic environment for  low-frequency conducted disturbances and signalling in public power supply  systems
IEC 61000-2-2-2002	Electromagnetic Compatibility (EMC) Part 2-2: Environment -  Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling  in Public Low-Voltage Power Supply Systems
IEC 61000-2-2-2017	Electromagnetic Compatibility (EMC) Part 2-2: Environment -  Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling  in Public Low-Voltage Power Supply Systems
IEC 61000-2-2-2018	Electromagnetic Compatibility (EMC) Part 2-2: Environment -  Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling  in Public Low-Voltage Power Supply Systems
IEC TR 61000-2-3-1992 scan	Electromagnetic compatibility (EMC) Part 2: Environment Section  3: Description of the environment - Radiated and  non-network-frequency-related conducted phenomena
IEC 61000-2-4-2002	Electromagnetic compatibility (EMC) Part 2-4: Environment -  Compatibility levels for low-frequency conducted disturbances
IEC 61000-2-4-2002 cor1-2014	Electromagnetic compatibility (EMC) Part 2-4: Environment -  Compatibility levels for low-frequency conducted disturbances
IEC TR 61000-2-5-2011	Electromagnetic compatibility (EMC) – Part 2-5: Environment –  Description and classification of electromagnetic environments
IEC TR 61000-2-5-2017	Electromagnetic compatibility (EMC) – Part 2-5: Environment –  Description and classification of electromagnetic environments
IEC TR 61000-2-6-1995 scan	Electromagnetic compatibility (EMC) - Part 2: Environment -  section 6: Assessment of the emission levels in the power supply of  industrial plants as regards low-frequency conducted disturbances
IEC TR 61000-2-7-1998	Electromagnetic Compatibility (EMC) - Part 2: Environment -  Section 7: Low Frequency Magnetic Fields in Various Environments
IEC TR 61000-2-8-2002	Electromagnetic compatibility (EMC) Part 2-8: Environment  Voltage dips and short interruptions on public electric power supply systems  with statistical measurement results
IEC 61000-2-9-1996 scan	Electromagnetic Compatibility (EMC) - Part 2: Environment -  Section 9: Description of HEMP Environment - Radiated Disturbance Basic EMC  Publication First Edition
IEC 61000-2-10-1998	Electromagnetic Compatibility (EMC) - Part 2-10: Environment -  Description of HEMP Environment - Conducted Disturbance
IEC 61000-2-11-1999	Electromagnetic Compatibility (EMC) - Part 2-11: Environment -  Classification of HEMP Environments
IEC 61000-2-12-2003	Electromagnetic compatibility (EMC) Part 2-12: Environment  Compatibility levels for low-frequency conducted disturbances and signalling  in public medium-voltage power supply systems
IEC 61000-2-13-2005	Electromagnetic compatibility (EMC) Part 2-13: Environment  High-power electromagnetic (HPEM) environments Radiated and conducted
IEC TR 61000-2-14-2006	Electromagnetic compatibility (EMC) – Part 2-14: Environment –  Overvoltages on public electricity distribution networks

shukesan

IEC 61000-3-2-2014	Electromagnetic  compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current  emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-2-2018	Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits  for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3-2013	Electromagnetic compatibility (EMC) – Part 3-3: Limits –  Limitation of voltage changes, voltage fluctuations and flicker in public  low-voltage supply systems, for equipment with rated current ≤ 16 A per phase  and not subject to conditional connection
IEC 61000-3-3-2017	Electromagnetic compatibility (EMC) – Part 3-3: Limits –  Limitation of voltage changes, voltage fluctuations and flicker in public  low-voltage supply systems, for equipment with rated current ≤ 16 A per phase  and not subject to conditional connection
IEC TR 61000-3-4-1998	Electromagnetic compatibility (EMC) – Part 3-4: Limits –  Limitation of emission of harmonic currents in low-voltage power supply  systems for equipment with rated current greater than 16 A
IEC TS 61000-3-5-2009	Electromagnetic compatibility (EMC) – Part 3-5: Limits –  Limitation of voltage fluctuations and flicker in low-voltage power supply  systems for equipment with rated current greater than 75 A
IEC TS 61000-3-5-2009 cor1-2009	Electromagnetic compatibility (EMC) – Part 3-5: Limits –  Limitation of voltage fluctuations and flicker in low-voltage power supply  systems for equipment with rated current greater than 75 A
IEC TS 61000-3-5-2009 cor2-2010	Electromagnetic compatibility (EMC) – Part 3-5: Limits –  Limitation of voltage fluctuations and flicker in low-voltage power supply  systems for equipment with rated current greater than 75 A
IEC TR 61000-3-6-2008	Electromagnetic compatibility (EMC) – Part 3-6: Limits –  Assessment of emission limits for the connection of distorting installations  to MV, HV and EHV power systems
IEC TR 61000-3-7-2008	Electromagnetic compatibility (EMC) – Part 3-7: Limits –  Assessment of emission limits for the connection of fluctuating installations  to MV, HV and EHV power systems
IEC 61000-3-8-1997	Electromagnetic Compatibility (EMC) - Part 3: Limits - Section  8: Signalling on Low-Voltage Electrical Installations - Emission Levels,  Frequency Bands and Electromagnetic Disturbance Levels
IEC 61000-3-11-2000	Electomagnetic Compatibility (EMC) - Part 3-11: Limits -  Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public  Low-Voltage Supply Systems - Equipment with Rated Current Less Than or Equal  to 75 A and Subject to Conditional Connection
IEC 61000-3-11-2017	Electomagnetic Compatibility (EMC) - Part 3-11: Limits -  Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public  Low-Voltage Supply Systems - Equipment with Rated Current Less Than or Equal  to 75 A and Subject to Conditional Connection
IEC 61000-3-12-2011	Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits  for harmonic currents produced by equipment connected to public low-voltage  systems with input current >16 A and ≤75 A per phase
IEC TR 61000-3-13-2008	Electromagnetic compatibility (EMC) – Part 3-13: Limits –  Assessment of emission limits for the connection of unbalanced installations  to MV, HV and EHV power systems
IEC TR 61000-3-13-2008 cor1-2010	Electromagnetic compatibility (EMC) – Part 3-13: Limits –  Assessment of emission limits for the connection of unbalanced installations  to MV, HV and EHV power systems
IEC TR 61000-3-14-2011	Electromagnetic compatibility (EMC) – Part 3-14: Assessment of  emission limits for harmonics, interharmonics, voltage fluctuations and  unbalance for the connection of disturbing installations to LV power systems
IEC TR 61000-3-15-2011	Electromagnetic compatibility (EMC) – Part 3-15: Limits –  Assessment of low frequency electromagnetic immunity and emission  requirements for dispersed generation systems in LV network

shukesan

IEC 61000-4-1-2006	Electromagnetic  compatibility (EMC) – Part 4-1: Testing and measurement techniques – Overview  of IEC 61000-4 series
IEC TR 61000-4-1-2016	Electromagnetic compatibility (EMC) – Part 4-1 : Testing and  measurement techniques – Overview of the IEC 61 000-4 series
IEC 61000-4-2-2008	Electromagnetic compatibility (EMC) – Part 4-2: Testing and  measurement techniques – Electrostatic discharge immunity test
IEC 61000-4-3-2010	Electromagnetic compatibility (EMC) – Part 4-3: Testing and  measurement techniques – Radiated, radio-frequency, electromagnetic field  immunity test - Edition 3.2; Consolidated Reprint; Includes Interpretation 1:  08/2008
IEC 61000-4-4-2012	Electromagnetic compatibility (EMC) – Part 4-4: Testing and  measurement techniques – Electrical fast transient/burst immunity test
IEC 61000-4-5-2014	Electromagnetic compatibility (EMC) – Part 4-5: Testing and  measurement techniques – Surge immunity test
IEC 61000-4-5-2017	Electromagnetic compatibility (EMC) – Part 4-5: Testing and  measurement techniques – Surge immunity test
IEC 61000-4-6-2013	Electromagnetic compatibility (EMC) – Part 4-6: Testing and  measurement techniques – Immunity to conducted disturbances, induced by  radio-frequency fields
IEC 61000-4-6-2013 cor1-2015	Electromagnetic compatibility (EMC) – Part 4-6: Testing and  measurement techniques – Immunity to conducted disturbances, induced by  radio-frequency fields
IEC 61000-4-7-2009	Electromagnetic compatibility (EMC) – Part 4-7: Testing and  measurement techniques – General guide on harmonics and interharmonics  measurements and instrumentation, for power supply systems and equipment  connected thereto ; Consolidated Reprint
IEC 61000-4-8-2009	Electromagnetic compatibility (EMC) – Part 4-8: Testing and  measurement techniques – Power frequency magnetic field immunity test
IEC 61000-4-9-2001	Electromagnetic Compatibility (EMC) - Part 4-9: Testing and  Measurement Techniques - Pulse Magnetic Field Immunity Test ; Consolidated  Reprint
IEC 61000-4-9-2016	Electromagnetic Compatibility (EMC) - Part 4-9: Testing and  Measurement Techniques - Pulse Magnetic Field Immunity Test ; Consolidated  Reprint
IEC 61000-4-10-2001	Electromagnetic Compatibility (EMC) - Part 4-10: Testing and  Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test  Consolidated Reprint
IEC 61000-4-10-2016	Electromagnetic Compatibility (EMC) - Part 4-10: Testing and  Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test  Consolidated Reprint
IEC 61000-4-11-2004 IS1-2010	Electromagnetic compatibility (EMC) - Part 4-11: Testing and  measurement techniques - Voltage dips, short interruptions and voltage  variations immunity tests
IEC 61000-4-11-2004	Electromagnetic compatibility (EMC) - Part 4-11: Testing and  measurement techniques - Voltage dips, short interruptions and voltage  variations immunity tests
IEC 61000-4-11-2017	Electromagnetic compatibility (EMC) - Part 4-11: Testing and  measurement techniques - Voltage dips, short interruptions and voltage  variations immunity tests
IEC 61000-4-12-2006	Electromagnetic Compatibility (EMC) Part 4-12: Testing and  Measurement Techniques - Oscillatory Waves Immunity Test
IEC 61000-4-12-2017	Electromagnetic Compatibility (EMC) Part 4-12: Testing and  Measurement Techniques - Oscillatory Waves Immunity Test
IEC 61000-4-13-2009	Electromagnetic compatibility (EMC) – Part 4-13: Testing and  measurement techniques – Harmonics and interharmonics including mains  signalling at a.c. power port, low frequency immunity tests Consolidated  Reprint
IEC 61000-4-13-2015	Electromagnetic compatibility (EMC) – Part 4-13: Testing and  measurement techniques – Harmonics and interharmonics including mains  signalling at a.c. power port, low frequency immunity tests Consolidated  Reprint
IEC 61000-4-13-2002 amd2-2015	Electromagnetic compatibility (EMC) – Part 4-13: Testing and  measurement techniques – Harmonics and interharmonics including mains  signalling at a.c. power port, low frequency immunity tests Consolidated  Reprint
IEC 61000-4-14-2009	Electromagnetic compatibility (EMC) – Part 4-14: Testing and  measurement techniques – Voltage fluctuation immunity test for equipment with  input current not exceeding 16 A per phase ; Consolidated Reprint
IEC 61000-4-15-2010	Electromagnetic compatibility (EMC) – Part 4-15: Testing and  measurement techniques – Flickermeter – Functional and design specifications
IEC 61000-4-15-2010 cor1-2012	Electromagnetic compatibility (EMC) – Part 4-15: Testing and  measurement techniques – Flickermeter – Functional and design specifications

shukesan

IEC 61000-4-16-2011	Electromagnetic  compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test  for immunity to conducted, common mode disturbances in the frequency range 0  Hz to 150 kHz ; Consolidated Reprint
IEC 61000-4-16-2015	Electromagnetic compatibility (EMC) – Part 4-16: Testing and  measurement techniques – Test for immunity to conducted, common mode  disturbances in the frequency range 0 Hz to 150 kHz ; Consolidated Reprint
IEC 61000-4-17-2009	Electromagnetic compatibility (EMC) – Part 4-17: Testing and  measurement techniques – Ripple on d.c. input power port immunity test ;  Consolidated Reprint
IEC 61000-4-18-2011	Electromagnetic compatibility (EMC) – Part 4-18: Testing and  measurement techniques – Damped oscillatory wave immunity test ; Consolidated  Reprint
IEC 61000-4-19-2014	Electromagnetic compatibility (EMC) – Part 4-19: Testing and  measurement techniques – Test for immunity to conducted, differential mode  disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.  power ports
IEC 61000-4-20-2010	Electromagnetic compatibility (EMC) – Part 4-20: Testing and  measurement techniques – Emission and immunity testing in transverse  electromagnetic (TEM) waveguides
IEC 61000-4-21-2011	Electromagnetic compatibility (EMC) – Part 4-21: Testing and  measurement techniques – Reverberation chamber test methods
IEC 61000-4-22-2010	Electromagnetic compatibility (EMC) – Part 4-22: Testing and  measurement techniques – Radiated emissions and immunity measurements in  fully anechoic rooms (FARs)
IEC 61000-4-23-2000	Electromagnetic Compatibility (EMC) - Part 4-23: Testing and  Measurement Techniques - Test Methods for Protective Devices for HEMP and  Other Radiated Disturbances
IEC 61000-4-23-2016	Electromagnetic Compatibility (EMC) - Part 4-23: Testing and  Measurement Techniques - Test Methods for Protective Devices for HEMP and  Other Radiated Disturbances
IEC 61000-4-24-1997	Electromagnetic compatibility (EMC) – Part 4-24: Testing and  measurement techniques – Test methods for protective devices for HEMP  conducted disturbance
IEC 61000-4-24-2015	Electromagnetic compatibility (EMC) – Part 4-24: Testing and  measurement techniques – Test methods for protective devices for HEMP  conducted disturbance
IEC 61000-4-25-2012	Electromagnetic compatibility (EMC) Part 4-25: Testing and  measurement techniques – HEMP immunity test methods for equipment and systems  ; Consolidated Reprint
IEC 61000-4-27-2009	Electromagnetic compatibility (EMC) – Part 4-27: Testing and  measurement techniques – Unbalance, immunity test for equipment with input  current not exceeding 16 A per phase ; Consolidated Reprint
IEC 61000-4-28-2009	Electromagnetic compatibility (EMC) – Part 4-28: Testing and  measurement techniques – Variation of power frequency, immunity test for  equipment with input current not exceeding 16 A per phase ; Consolidated  Reprint
IEC 61000-4-29-2000	Electromagnetic Compatibility (EMC) - Part 4-29: Testing and  Measurement Techniques - Voltage Dips, Short Interruptions and Voltage  Variations on d.c. Input Power Port Immunity Tests
IEC 61000-4-30-2008	Electromagnetic compatibility (EMC) – Part 4-30: Testing and  measurement techniques – Power quality measurement methods
IEC 61000-4-30-2015	Electromagnetic compatibility (EMC) – Part 4-30: Testing and  measurement techniques – Power quality measurement methods
IEC 61000-4-30-2015 cor1-2016	Electromagnetic compatibility (EMC) – Part 4-30: Testing and  measurement techniques – Power quality measurement methods

shukesan

IEC 61000-4-31-2016	Electromagnetic  compatibility (EMC) – Part 4-31 : Testing and measurement techniques – AC  mains ports broadband conducted disturbance immunity test
IEC TR 61000-4-32-2002	Electromagnetic compatibility (EMC) Part 4-32: Testing and  measurement techniques High-altitude electromagnetic pulse (HEMP) simulator  compendium
IEC 61000-4-33-2005	Electromagnetic compatibility (EMC) Part 4-33: Testing and  measurement techniques Measurement methods for high-power transient  parameters
IEC 61000-4-34-2009	Electromagnetic compatibility (EMC) – Part 4-34: Testing and  measurement techniques – Voltage dips, short interruptions and voltage  variations immunity tests for equipment with mains current more than 16 A per  phase ; Consolidated Reprint
IEC TR 61000-4-35-2009	Electromagnetic compatibility (EMC) – Part 4-35: Testing and  measurement techniques – HPEM simulator compendium
IEC 61000-4-36-2014	Electromagnetic compatibility (EMC) – Part 4-36: Testing and  measurement techniques – IEMI immunity test methods for equipment and systems
IEC TR 61000-4-37-2016 disk	Electromagnetic compatibility (EMC) – Part 4-37: Testing and  measurement techniques – Calibration and verification protocol for harmonic  emission compliance test systems
IEC TR 61000-4-37-2016	Electromagnetic compatibility (EMC) – Part 4-37: Testing and  measurement techniques – Calibration and verification protocol for harmonic  emission compliance test systems
IEC TR 61000-4-38-2015	Electromagnetic compatibility (EMC) – Part 4-38: Testing and  measurement techniques – Test, verification and calibration protocol for  voltage fluctuation and flicker compliance test systems
IEC 61000-4-39-2017	Electromagnetic compatibility (EMC) – Part 4-39: Testing and  measurement techniques – Radiated fields in close proximity – Immunity test
IEC TR 61000-5-1-1996	Electromagnetic Compatibility (EMC) - Part 5: Installation and  Mitigation Guidelines - Section 1: General Considerations Basic EMC  Publication
IEC TR 61000-5-2-1997	Electromagnetic Compatibility (EMC) - Part 5: Installation and  Mitigation Guidelines - Section 2: Earthing and Cabling
IEC TR 61000-5-3-1999	Electromagnetic Compatibility (EMC) - Part 5-3: Installation and  Mitigation Guidelines - HEMP Protection Concepts
IEC TR 61000-5-4-1996 scan	Electromagnetic compatibility (EMC) - Part 5: Installation and  mitigation guidelines - Section 4: Immunity to HEMP - specifications for  protective devices against HEMP radiated disturbance - Basic EMC publication
IEC 61000-5-5-1996 scan	Electromagnetic Compatibility (EMC) Part 5: Installation and  Mitigation Guidelines Section 5: Specification of Protective Devices for HEMP  Conducted Disturbance - Basic EMC Publication First Edition
IEC TR 61000-5-6-2002	Electromagnetic Compatibility (EMC) - Part 5-6: Installation and  Mitigation Guidelines - Mitigation of External EM Influences
IEC 61000-5-7-2001	Electromagnetic Compatibility (EMC) - Part 5-7: Installation and  Mitigation Guidelines - Degrees of Protection Provided by Enclosures Against  Electromagnetic Disturbances (EM Code)
IEC TS 61000-5-8-2009	Electromagnetic compatibility (EMC) – Part 5-8: Installation and  mitigation guidelines – HEMP protection methods for the distributed  infrastructure
IEC TS 61000-5-9-2009	Electromagnetic compatibility (EMC) – Part 5-9: Installation and  mitigation guidelines – System-level susceptibility assessments for HEMP and  HPEM
IEC TS 61000-5-10-2017	Electromagnetic compatibility (EMC) – Part 5-1 0: Installation  and mitigation guidelines – Guidance on the protection of facilities against  HEMP and IEMI

shukesan

IEC 61000-6-1-2005	Electromagnetic  compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential,  commercial and light-industrial environments
IEC 61000-6-1-2016	Electromagnetic compatibility (EMC) – Part 6-1: Generic  standards – Immunity for residential, commercial and light-industrial  environments
IEC 61000-6-2-2005	Electromagnetic compatibility (EMC) – Part 6-2: Generic  standards – Immunity for industrial environments
IEC 61000-6-2-2016	Electromagnetic compatibility (EMC) – Part 6-2: Generic  standards – Immunity for industrial environments
IEC 61000-6-3-2011	Electromagnetic compatibility (EMC) – Part 6-3: Generic  standards – Emission standard for residential, commercial and  light-industrial environments ; Consolidated Reprint
IEC 61000-6-4-2011	Electromagnetic compatibility (EMC) – Part 6-4: Generic  standards – Emission standard for industrial environments ; Consolidated  Reprint
IEC 61000-6-4-2018	Electromagnetic compatibility (EMC) – Part 6-4: Generic  standards – Emission standard for industrial environments ; Consolidated  Reprint
IEC TS 61000-6-5-2001	Electromagnetic compatibility (EMC) – Part 6-5: Generic  standards – Immunity for power station and substation environments
IEC 61000-6-5-2015	Electromagnetic compatibility (EMC) – Part 6-5: Generic  standards – Immunity for equipment used in power station and substation  environment
IEC 61000-6-5-2015 cor1-2017	Electromagnetic compatibility (EMC) – Part 6-5: Generic  standards – Immunity for equipment used in power station and substation  environment
IEC 61000-6-6-2003	Electromagnetic compatibility (EMC) Part 6-6: Generic standards  HEMP immunity for indoor equipment
IEC 61000-6-7-2014	Electromagnetic compatibility (EMC) – Part 6-7: Generic  standards – Immunity requirements for equipment intended to perform functions  in a safety-related system (functional safety) in industrial locations

Sco517

好贴，顶一个~~

admin

谢谢您的分享，金币已奖励!

lotustree75

下了好多新版的，金币花光光

hgundas

謝謝樓主的分享！！！！！！