世界资料网论坛

标题: ASTM D1552-2008 石油产品含硫量试验方法(高温法) 下载 [打印本页]

作者: sigh007 时间: 2013-3-14 10:46:51 标题: ASTM D1552-2008 石油产品含硫量试验方法(高温法) 下载

中文名称: 石油产品含硫量试验方法(高温法)

英文名称:Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

中标分类：E30	ICS分类：75.080
标准分类编号：AS	页数：7

发布日期：	实施日期：2008-12-01	作废日期：
被替代标准：		代替标准：ASTM D1552-2007
引用标准：ASTM D1193;ASTM D1266;ASTM D4057;ASTM D6299;ASTM D6792		采用标准：
起草单位：		归口单位：

标引依据：

补充修订：

备注：

范围：1.1 This test method covers three procedures for the determination of total sulfur in petroleum products including lubricating oils containing additives, and in additive concentrates. This test method is applicable to samples boiling above 177°C (350°F) and containing not less than 0.06 mass % sulfur. Two of the three procedures use iodate detection; one employing an induction furnace for pyrolysis, the other a resistance furnace. The third procedure uses IR detection following pyrolysis in a resistance furnace. 1.2 Petroleum coke containing up to 8 mass % sulfur can be analyzed. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation

下载：[attach]874[/attach]

作者: 刍狗2012 时间: 2013-6-5 20:56:09

不错，非常非常感谢

作者: nbjwbzj 时间: 2013-6-8 14:47:18

谢谢分享！！！！！！！

作者: Alva 时间: 2013-6-18 15:44:39

楼主发帖辛苦了，感谢分享

作者: cwd285 时间: 2014-11-3 09:07:39

感谢分享,非常需要这份标准

作者: a57089020 时间: 2014-11-6 11:20:52

谢谢分享

作者: zhywang2008 时间: 2015-1-6 21:31:21

谢谢分享！！！！！！！！！！！！！！！！！！11

欢迎光临世界资料网论坛 (http://bbs.infoeach.com/)