世界资料网论坛

标题: 求ASTM A314-08,A414-10,A478-97R08,A479-08,A484-11,A510-08,A568-09,A569-10 [打印本页]

作者: mechen 时间: 2013-12-13 16:21:43 标题: 求ASTM A314-08,A414-10,A478-97R08,A479-08,A484-11,A510-08,A568-09,A569-10

求ASTM A314-08, A414-10 , A478-97R08, A479-08,A484-11, A510-08,A568-09, A569-10

个人并非要现行版，请分享所需版本就可。

作者: leunghb 时间: 2013-12-13 16:21:44

ASTM A568/A568M-09

Standard Specification for
Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

http://bbs.infoeach.com/thread-43357-1-1.html

作者: liuxilin1215 时间: 2013-12-13 22:34:04

本帖最后由 liuxilin1215 于 2013-12-13 22:36 编辑

ASTM A314-08 Standard Specification for Stainless Steel Billets and Bars for Forging
http://bbs.infoeach.com/thread-43140-1-1.html
ASTM A414/A414M-10 压力容器用高强度低合金碳素钢薄板标准
http://bbs.infoeach.com/thread-43133-1-1.html
ASTM A478-97(R2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
http://bbs.infoeach.com/thread-43134-1-1.html
ASTM A479/A479M-04 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
http://bbs.infoeach.com/thread-20025-1-1.html
ASTM A484/A484M-10 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
http://bbs.infoeach.com/thread-43135-1-1.html
ASTM A510/A510M-13 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
http://bbs.infoeach.com/thread-43136-1-1.html
ASTM A568/A568M-06a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process
http://bbs.infoeach.com/thread-43137-1-1.html
ASTM A569/A569M-98 Standard Specification for Steel,Carbon(0.15 Maximum,Percent),Hot-Rolled Sheet and Strip Commercial
http://bbs.infoeach.com/thread-43139-1-1.html

作者: mechen 时间: 2013-12-14 07:29:33

liuxilin1215 发表于 2013-12-13 22:34
ASTM A314-08 Standard Specification for Stainless Steel Billets and Bars for Forging
http://bbs.info ...

个人并非要现行版，请分享所需版本就可。

作者: leunghb 时间: 2013-12-17 13:02:58

ASTM A479/A479M-08

Standard Specification for
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

http://bbs.infoeach.com/thread-43353-1-1.html

作者: leunghb 时间: 2013-12-17 13:08:39

ASTM A510-08

Standard Specification for
General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

http://bbs.infoeach.com/thread-43355-1-1.html

作者: leunghb 时间: 2013-12-17 13:11:24

ASTM A510M-08

Standard Specification for
General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric)

http://bbs.infoeach.com/thread-43356-1-1.html

欢迎光临世界资料网论坛 (http://bbs.infoeach.com/)