ackages
ipe fittings
ressure pipes;Rescue and ambulance services;Specification (approval);Specifications;Testing;Tubing (medical)【摘要】: 1.1 This International Standard specifies requirements for low-pressure hose assemblies intended for usewith the following medical gases: -oxygen; -nitrous oxide; -medical air; -helium; -carbon dioxide; -xenon; -specified mixtures of the gases listed above; -oxygen-enriched air; -air for driving surgical tools; -nitrogen for driving surgical tools; vacuum.It is intended in particular to ensure gas-specificity and to prevent cross-connection between systemsconveying different gases. These hose assemblies are intended for use at maximum operating pressures ofless than 1 400 kPa.1.2 This International Standard specifies the allocation of (NIST), (DISS), (SIS) connectors to medicalgases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors.1.3 This International Standard does not specify:- requirements for coaxial hoses used for the supply and disposal of air for driving surgical tools;- requirements for electrical conductivity.1.4 This International Standard does not specify the intended uses of hose assemblies.NOTE Some examples of intended use specified in other International Standards are as follows:a) between a terminal unit and medical equipment (ISO 9170-1, IEC 60601-2-12, IEC 60601-2-13);b) between the fixed pipeline system and a terminal unit of that system (ISO 7396-1, ISO 11197);c) between a terminal unit and a second terminal unit (ISO 7396-1);d) between an emergency supply and an emergency and maintenance inlet point of a pipeline system (ISO 10524-1,ISO 7396-1);e) between an emergency supply and medical equipment (ISO 10524-1, ISO 10524-3, IEC 60601-2-12,IEC 60601-2-13).【中国标准分类号】: C46【国际标准分类号】: 11_040_10【页数】: 38P.;A4【正文语种】: 英语 | 欢迎光临 世界资料网论坛 (http://bbs.infoeach.com/) | Powered by Discuz! X2.5 |