世界资料网论坛

标题: ASTM D3045-1992(2010) 无负荷塑料热老化规程 下载 [打印本页]

作者: sigh007    时间: 2013-3-19 10:32:28     标题: ASTM D3045-1992(2010) 无负荷塑料热老化规程 下载

中文名称: 无负荷塑料热老化规程

英文名称:Standard Practice for Heat Aging of Plastics Without Load

            
            
                          

中标分类:G32

ICS分类:83.080.01

标准分类编号:AS

页数:5

            
            
                          

发布日期:

实施日期:1992-11-15

作废日期:

被替代标准:

代替标准:ASTM D3045-1992(2003)

引用标准:ASTM D573;ASTM D618;ASTM D883;ASTM D1870;ASTM D1898;ASTM E145;ASTM E456;ISO 2578

采用标准:

起草单位:

归口单位:

            
            
                          

标引依据: ;

补充修订:

备注:

范围:1.1 This practice is intended to define the exposure conditions for testing the resistance of plastics to oxidation or other degradation when exposed solely to hot air for extended periods of time. Only the procedure for heat exposure is specified, not the test method or specimen. The effect of heat on any particular property may be determined by selection of the appropriate test method and specimen. 1.2 This practice should be used as a guide to compare thermal aging characteristics of materials as measured by the change in some property of interest. This practice recommends procedures for comparing the thermal aging characteristics of materials at a single temperature. Recommended procedures for determining the thermal aging characteristics of a material at a series of temperatures for the purpose of estimating time to a defined property change at some lower temperature are also described. 1.3 This practice does not predict thermal aging characteristics where interactions between str

下载:[attach]1379[/attach]






作者: 2013    时间: 2013-3-23 16:01:47

谢谢分享!!!!!!!!
作者: zhanwor    时间: 2013-9-25 17:59:48

谢 谢 分 享...........................


作者: a280221580    时间: 2014-11-10 17:11:50

谢谢分享!!!!!!!!!!!
作者: xzspecial    时间: 2016-4-25 14:49:10

你好,我想下载,但是还是没有找到下载的地方
作者: skooder    时间: 2016-4-26 10:03:34

省道省道阿萨
作者: luohi123    时间: 2017-8-22 16:38:48


谢谢分享!!!!!!!!!!!




欢迎光临 世界资料网论坛 (http://bbs.infoeach.com/) Powered by Discuz! X2.5