世界资料网论坛

标题: ASTM B400-2008 致密圆形同心绞捻的1350型铝导线规格 下载 [打印本页]

作者: sigh007    时间: 2013-2-1 18:24:04     标题: ASTM B400-2008 致密圆形同心绞捻的1350型铝导线规格 下载

本帖最后由 infoeach 于 2013-2-18 15:38 编辑

中文名称: 致密圆形同心绞捻的1350型铝导线规格

英文名称:Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

            
            
                          

中标分类:K11

ICS分类:29.240.20

标准分类编号:AS

页数:6

            
            
                          

发布日期:

实施日期:2008-09-01

作废日期:

被替代标准:  

代替标准:ASTM B400-2004

引用标准:ASTM B609/B609M;ASTM B230/B230M;ASTM B231/B231M;ASTM B354;ASTM B263;NBS;ASTM E29;ASTM E527

采用标准:

起草单位:

归口单位:

            
            
                          

标引依据:

补充修订:

备注:

范围:1.1 This specification covers aluminum 1350-H19 (extra hard), 1350-H16 or -H26 ([n ]hard), 1350-H14 or -H24 (1/2 hard) and 1350-H142 or -H242 (1/2 hard) bare compact-round concentric-lay-stranded conductors made from round or shaped wires for use as uninsulated electrical conductors or in covered or insulated electrical conductors. These conductors shall be composed of a central core surrounded by one or more roller or die compacted layers of helically applied wires (Explanatory Note 1 and Note 2). 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.   Note 1—Prior to 1975, aluminum 1350 was designated as EC aluminum.   Note 2—The aluminum and temper designations conform to ANSI Standard H35.1. Aluminum 1350 corr

下载地址:[attach]164[/attach]




作者: bsgroupwhx    时间: 2013-7-1 09:29:36

看看,这个标准

作者: djt7009    时间: 2014-5-25 10:08:56

是什么版本的,看看,只看中文的,英文不过关。
作者: lkp128    时间: 2014-5-27 10:31:51

好东西好东西好东西好东西

作者: ahwwwsb    时间: 2014-10-7 20:37:18

谢谢分享

作者: chentong02    时间: 2017-1-5 15:58:35

谢谢分享
谢谢分享谢谢分享谢谢分享谢谢分享谢谢分享




欢迎光临 世界资料网论坛 (http://bbs.infoeach.com/) Powered by Discuz! X2.5