世界资料网论坛

标题: ASTM D6931-2007 沥青混合物的间接拉伸(IDT)强度用标准试验方法 [打印本页]

作者: sigh007    时间: 2012-3-29 17:23:40     标题: ASTM D6931-2007 沥青混合物的间接拉伸(IDT)强度用标准试验方法


                   【英文标准名称】:     Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures            【原文标准名称】:     沥青混合物的间接拉伸(IDT)强度用标准试验方法            【标准号】:     ASTM D6931-2007            【标准状态】:     现行            【国别】:                 【发布日期】:     2007    【实施或试行日期】: 【发布单位】: 美国材料与试验协会(US-ASTM)【起草单位】: D04.26【标准类型】: (Test Method)【标准水平】: ()【中文主题词】: 美国试验与材料协会;沥青;建筑材料;间接的;混合物;道路施工;拉伸;测试【英文主题词】: asphalt mixture; bituminous mixture; indirect tensile strength; IDT【摘要】: The values of IDT strength may be used to evaluate the relative quality of bituminous mixtures in conjunction with laboratory mix design testing and for estimating the potential for rutting or cracking.  The results can also be used to determine the potential for field pavement moisture damage when results are obtained on both moisture-conditioned and unconditioned specimens.1.1 This test method covers procedures for preparing and testing laboratory-fabricated or field-recovered cores of bituminous mixtures to determine the Indirect Tensile (IDT) Strength.1.2 The within-laboratory repeatability standard deviation, for the recommended rate of loading (50 mm/min) and test temperature (25176;C), has been determined to be 80 kPa (12 psi) for 100 mm (4 in.) diameter specimens, based on 28 labs using either 2 or 4 test replicates with 11 different mix samples. Additional data is provided in Table 1 for the users information. The between-laboratory reproducibility of this test method is being determined and will be available on or before August 2011. Therefore, this test method should not be used for acceptance or rejection of materials for purchasing purposes.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.【中国标准分类号】: E43【国际标准分类号】: 93_080_20【页数】: 5P.;A4【正文语种】:           
         
作者: 2013    时间: 2014-12-6 22:44:02

附件去哪儿了?                    




欢迎光临 世界资料网论坛 (http://bbs.infoeach.com/) Powered by Discuz! X2.5