世界资料网论坛

标题: BS EN 15544-2009 一次性砖瓦炉/灰泥炉.标示尺寸规格 [打印本页]

作者: sigh007 时间: 2012-3-29 13:21:20 标题: BS EN 15544-2009 一次性砖瓦炉/灰泥炉.标示尺寸规格

【英文标准名称】: One off Kachelgrund?fen/Putzgrund?fen (tiled/mortared stoves) - Dimensioning 【原文标准名称】: 一次性砖瓦炉/灰泥炉.标示尺寸规格【标准号】: BS EN 15544-2009 【标准状态】: 现行【国别】: 英国【发布日期】: 2009-08-31 【实施或试行日期】: 2009-08-31【发布单位】: 英国标准学会(GB-BSI)【起草单位】: BSI【标准类型】: ()【标准水平】: ()【中文主题词】: 烟囱;燃烧所需空气;燃气;燃烧空间;定义(术语);设计;尺寸规格;火炉;燃料;炉;加热器;数学计算;计算方法;标准热输出;操作说明书;性能检查;安全性要求;对流式供暖系统;固定的;火炉加热;温度;砌瓦炉【英文主题词】: Chimneys;Combustion air;Combustion gas;Combustion space;Definitions;Design;Dimensions;Fire places;Fuels;Furnaces;Heaters;Mathematical calculations;Methods of calculation;Nominal thermal output;Operational instructions

erformance check;Safety requirements;Space-heating systems;Stationary;Stove heating;Temperature;Tiled stoves【摘要】: This standard specifies calculations for the dimensioning of Kachelgrund?fen/Putzgrund?fen (tiled/mortaredstoves) based upon the required nominal heat output of the stove as declared by the producer. TheKachelgrund?fen/Putzgrund?fen (tiled/mortared stoves) are of individual one-off construction design. Thestandard can be used for log wood fired Kachel?fen (tile stoves) that burn one fuel load per storage periodwith a maximum load between 10 kg and 40 kg and a storage period (nominal heating time) between 8 h and24 h.This standard is valid for Kachelgrund?fen/Putzgrund?fen (tiled/mortared stoves) equipped with fireclay asinterior material, with an apparent density between 1,750 kg/m3 and 2,200 kg/m3, a degree of porosity from 18% up to 33 % by volume and a heat conductivity from 0,65 W/mK up to 0,90 W/mK (temperature range 20 °Cto 400 °C).This standard is valid for Kachelgrund?fen/Putzgrund?fen (tiled/mortared stoves) with sidewise combustion airsupply of the combustion chamber and an inflow speed from 2 m/s to 4 m/s, whereas the height of the lowestopening is at least 5 cm above the bottom of the combustion chamber.This standard is not valid for combinations with water heat exchangers for central heating or other heatabsorbing elements like glass plates greater than 1/6 of the combustion chamber surface, open water tanks,etc. It is also not valid for combinations with heating/fireplace elements according to EN 13229. Furthermorethis standard is not valid for mass-produced prefabricated or partly prefabricated slow heat release appliancesaccording to EN 15250.NOTE Although for the purposes of this standard these calculations are applicable only to the requirements of thisstandard, the same calculations can be used for other purposes, e.g. to verify emission levels and energy efficiency incase of burning log wood or wood briquettes according to the producer’s manual.【中国标准分类号】: Q83【国际标准分类号】: 97_100_30【页数】: 22P.;A4【正文语种】: 英语

欢迎光临世界资料网论坛 (http://bbs.infoeach.com/)