世界资料网论坛

标题: BS EN 10346-2009 连续热浸涂覆钢扁平制品.技术交付条件 [打印本页]

作者: sigh007 时间: 2012-3-26 21:59:27 标题: BS EN 10346-2009 连续热浸涂覆钢扁平制品.技术交付条件

【英文标准名称】: Continuously hot-dip coated steel flat products - Technical delivery conditions 【原文标准名称】: 连续热浸涂覆钢扁平制品.技术交付条件【标准号】: BS EN 10346-2009 【标准状态】: 现行【国别】: 英国【发布日期】: 2009-03-31 【实施或试行日期】: 2009-03-31【发布单位】: 英国标准学会(GB-BSI)【起草单位】: BSI【标准类型】: ()【标准水平】: ()【中文主题词】: 验收规范;铝合金;铝涂覆;化学成分;涂层;冷加工;稳定性(机械性能);连续的;防腐蚀;定义;交付;交货条件;名称与符号;尺寸;精整;扁钢棒;扁平制品;扁平轧材;等级(质量);热浸镀锌;热浸金属涂覆;热镀锌的;检验;作标记;材料;机械性能;金属涂层;金属;顺序示度;定单;表面预处理;生产;性能;防护覆层;半成品;薄板材;薄钢板;规范(验收);钢的等级;钢产品;带钢;钢;储存;带材;结构钢;表面提纯;表面处理;表面;试验;厚度;运输;非合金钢;可焊性;锌;锌合金;锌覆层【英文主题词】: Acceptance specification;Aluminium alloys;Aluminium coating;Chemical composition;Coatings;Cold-working;Consistency (mechanical property);Continuous;Corrosion protection;Definitions;Delivery;Delivery conditions;Designations;Dimensions;Finishes;Flat bars;Flat products;Flat rolled products;Grades (quality);Hot-dip galvanizing;Hot-dip metal coating;Hot-galvanized;Inspection;Marking;Materials;Mechanical properties;Metal coating;Metal coatings;Metals;Order indications;Orders (sales documents)

re-treatment of surfaces

roduction

roperties

rotective coatings;Semi-finished products;Sheet materials;Sheet steels;Specification (approval);Steel grades;Steel products;Steel strips;Steels;Storage;Strips;Structural steels;Surface refinement;Surface treatment;Surfaces;Testing;Thickness;Transport;Unalloyed steels;Weldability;Zinc;Zinc alloys;Zinc coatings;Zinc coats【摘要】: This European Standard specifies requirements for continuously hot-dip coated products made of low carbonsteels for cold forming, of steels for construction, of steels with high proof strength for cold forming and coatedwith zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) or aluminium-silicon alloy(AS), and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc(Z) zinc-iron alloy (ZF) or zinc-aluminium alloy (ZA) with thicknesses of 0,35 mm to 3 mm unless otherwiseagreed.The thickness is the final thickness of the delivered product after coating.This document applies to strip of all widths and to sheets cut from it (≥ 600 mm width) and cut lengths(< 600 mm width).NOTE 1 Products coated with (pure) aluminium can also be available, but are not covered by this European standard.NOTE 2 By agreement at the time of enquiry and order, this European Standard is applicable to continuously hot-dipcoated flat products in thicknesses < 0,35 mm or > 3 mm with agreed mechanical properties, adhesion of coating andsurface condition requirements.NOTE 3 The products covered by this European Standard are used where cold formability, high strength, a definedminimum yield strength and corrosion resistance are the most important factors. Corrosion resistance of the product isproportional to the coating thickness, hence to its mass (see also 7.3.2). The products covered by this European Standardcan be used as substrates for organic coated flat products specified in EN 10169-1 and EN 10169-2 or EN 10169-3 forbuilding and general engineering applications.NOTE 4 By agreement at the time of enquiry and order, this European standard is applicable to other continuously hotdipcoated hot rolled steel flat products (e.g. in accordance with EN 10149-2).【中国标准分类号】: H46【国际标准分类号】: 77_140_50【页数】: 40P;A4【正文语种】: 英语

作者: jieer0811 时间: 2016-8-10 10:04:17

找中文标准，怎么没有看到链接啊

欢迎光临世界资料网论坛 (http://bbs.infoeach.com/)