sigh007 发表于 2013-3-29 19:10:39

ASTM A325-2010 经热处理的最小抗拉强度为120/105 ksi的钢结 下载


中文名称: 经热处理的最小抗拉强度为120/105 ksi的钢结构螺栓规格               
                                  英文名称:Standard Specification for Structural Bolts,Steel,Heat Treated,120/105 ksi Minimum Tensile Strength               
                          
            
                          
                                  中标分类:J13                  ICS分类:21.060.10               
                                  标准分类编号:AS                  页数:8               
                          
            
                          
                                  发布日期:                  实施日期:2010-05-01                  作废日期:               
                                  被替代标准:                   代替标准:ASTM A325-2009ae1               
                                  引用标准:                   采用标准:               
                                  起草单位:                  归口单位:               
                          
            
                          
                                  标引依据: ;               
                                  补充修订:               
                                  备注:               
                                  范围:1.1 This specification  covers two types  of quenched and tempered steel heavy hex structural bolts having a minimum tensile   strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0  to 1½  in., inclusive.  1.2 The bolts are intended for use in structural connections.  These connections are covered under the requirements of the Specification for  Structural Joints Using ASTM A325 or A490 Bolts,  approved by the Research Council on Structural Connections, endorsed by the American  Institute of Steel Construction and by the Industrial Fastener Institute.

下载:




gai 发表于 2013-6-1 09:46:48

thank you very much for your sharing

mechen 发表于 2013-8-10 18:11:06

thank you very much for your sharing

21319817 发表于 2013-8-30 20:25:15

:lol

狂風焚嵐 发表于 2013-10-9 11:09:21

ASTM A325-2010 很有用 谢谢

沉重的手 发表于 2014-7-25 22:27:18

谢谢谢谢谢谢谢谢谢谢谢谢谢谢

benbenqiang 发表于 2015-5-10 16:26:24

好东西,谢谢分享。:):):)
页: [1]
查看完整版本: ASTM A325-2010 经热处理的最小抗拉强度为120/105 ksi的钢结 下载